Machining Services

Cutter Machine Works is a full service CNC Machine Shop with 3-Axis CNC Milling and CNC Lathe services. Whether you are looking for custom firearms work, an additional partner in your supply chain, or prototypes, Cutter can help.

Scalability: From 1-10,000 parts

Custom Finishes: Select from a variety of finishes on solid metal and plastic parts.

Precision: CNC processes offer tolerances ranging from +/-0.001”-0.005”, depending on customer specs.

Rapid Turnaround: Cutter produces highly accurate, quick tun parts using the latest CNC machines.

  • Gunsmithing – $75 per Hour
    • Standard Firearms.
  • Inspection and Diagnosis – $35
    • Thoroughly inspect firearm to determine repairs needed.
  • Test Firing – $10 Plus Ammunition
    • We only use factory ammunition in the box to test fire.
  • Machining – $125 per Hour
    • Milling (RMR Cut $125)
    • Drilling & Tapping ($25 per Hole)
    • Barrel Threading ($125)
  • NFA Items – $125 per Hour
    • Machine Guns
    • SBR | SBS
    • Suppressors

 

*Shop rates are basic rates for services and do not include parts. We will provide a written estimate for authorization of any work performed. Firearms that need to be logged into FFL log book and evaluated by gunsmith will be subject to a $35 minimum billing.

  • Standard Firearm – $40

 

  • NFA Items – $85

 

*Extra charge for excessive rust, dirt and/or removal of any cosmoline type preservatives.

  • Pistol Sight Installation
    • Purchased from Cutter Machine Works.  – $20
    • Customer provided. – $40
    • 1911 Customer Provided. – $65
  • Pistol Optic Installation
    • Mount, Bore Site on Optic Ready Slide – $35
  • Rifle Optic Mounting
    • Install with Bore Sight. – $35
    • Scope Ring Lapping. – $35
  • Polymer Frame Trigger Kit Installation 
    • Trigger Kit Purchased From Cutter Machine Works – $40
    • Customer Provided Trigger Kit – $50
  • Handgun Action Job – $75
    • Engagement Surface Polishing
    • Lighter Springs (if Available)
  • Bolt Action Rifle – $75
    • Tuning/Fitting
    • Safety Function Check
  • AR Rifle – $35
    • Tuning/Fitting
    • Safety Function Check

 

*If the customer provides a trigger kit and it is incomplete, the customer is responsible for paying the cost of additional parts.

Mechanical Repairs

General Repair $75/Hr
Bench Fee | Cleaning $40
Rifle Trigger Work (Semi Auto) $80
Rifle Trigger Work (Bolt) $160
Rifle Barrel Fitting $75/Hr
AR Lower Receiver Assembly $75/Hr
AR Upper Receiver Assembly $75/Hr
Complete AR Assembly $175
Optic Install and Bore Sight $75
Scope Ring Lapping $75

Machining Rifle

Rifle Barrel Muzzle Threading $125
Drill and Tap Receiver for Optic Mount $75
Rifle Barrel Porting $110/Hr
Rifle Barrel Fluting $110/Hr
Rifle Barrel Crowning $110/Hr
Rifle Muzzle Device Install $80

Cerakote Refinish Rifle

Rifle Barrel Single Color Cerakote $75
Rifle Receiver Single Color Cerakote $75
Rifle Stock Single Color Cerakote $75
Complete Rifle Single Color Cerakote $200
Rifle Barrel Multi Color Cerakote $150
Rifle Receiver Multi Color Cerakote $150
Rifle Stock Multi Color Cerakote $150
Complete Rifle Single Color Cerakote $425
Small Parts Single Color $25

Engraving Rifle

NFA Engraving Receiver $60
Custom Engraving Receiver $80/Hr
Stock Image Engraving $30

Mechanical Repairs

General Repair $75/Hr
Bench Fee | Cleaning $40
Shotgun Trigger Work (Semi & Pump Only) $160
Front Sight Install $40
Center Sight Install Mid Rib $40
Resolder Top Vent Rib $225

Machining Shotgun

Drill and Tap Scope mount Holes $100
Choke Threading 12ga and 20ga only $125

Cerakote Refinish Shotgun

Shotgun Barrel Single Color Cerakote $75
Shotgun Receiver Single Color Cerakote $75
Shotgun Stock Single Color Cerakote $75
Complete Shotgun Single Color Cerakote $200
Shotgun Barrel Multi Color Cerakote $150
Shotgun Receiver Multi Color Cerakote $150
Shotgun Stock Multi Color Cerakote $150
Complete Shotgun Single Color Cerakote $425
Small Parts Single Color $25

Engraving Rifle

NFA Engraving Receiver $60
Custom Engraving Receiver $80/Hr
Stock Image Engraving $30

  • Ruger Single Action, Action Job – $80
    • 17lb Hammer Spring
    • Reduced Power Trigger Return Spring
    • Engagement Surface Polishing
  • Ruger Single Action, Power Custom Free Spin Pawl Install – $100
    • Fitting
    • Timing of Pawl (included)
    • Engagement Surface Polishing
  • Colt & Clone Single Action, Action Job – $100
    • Reduced Power main Spring
    • Reduced Power Wire Type Sear/Bolt Spring
    • Extra Power Base Pin Latch
    • Stainless Ejector Spring
  • Lever Action Rifle, Action Job – $75
    • Engagement Surface Polishing
Mechanical Repairs

General Repair $75/Hr
Bench Fee | Cleaning $40
Pistol Trigger Work (Semi Auto) $80
Pistol Trigger Work (Revolver) $160
Pistol Barrel Fitting $75/Hr
Pistol Barrel Ramp Polish $45
Pistol Sight Installation $70
Optic Install on Optic Ready Slide $40

Machining Pistol

Pistol Optic Cut $125
Pistol Sight Dovetail Cut $35
Pistol Slide Serrations 2 Sides Front/Rear $140
Pistol Slide Window Cut 2 Sides $80
Pistol Top Window $40
Pistol Top Serrations $35
Pistol Barrel Crowning $45
Pistol Muzzle Break Install and Dimple $80

Cerakote Refinish Pistol

Pistol Slide Single Color Cerakote $75
Pistol Frame Single Color Cerakote $100
Complete Pistol Single Color $150
Pistol Slide Multi Color or Artwork $150
Pistol frame Multi Color or Artwork $200
Complete Pistol Multi Color or Artwork $300

Stippling Frame Work

Basic Stipple Package $185
Elite Stipple Package $325

Engraving Pistol

Custom Engraving Slide $80/Hr
Serration Engraving Slide $160
Window Engraving Slide $160
Custom Engraving Frame $80
Laser Engraved Stippling $240
Stock Image Engraving $30

Get a Quote for your Specific Application Contact Us